China Home Theater Network (): Home theater audio is an important part of home theater. It is a device that restores electrical signals into sound signals. The authenticity of sound reproduction is used as an evaluation home theater. An important standard for acoustic performance. In addition to the playback performance of the home theater audio itself, the quality of the sound is also related to the placement and placement of the home theater audio. Here, Xiaobian says how to arrange the home theater audio correctly.
1. When the home theater audio is placed, it is necessary to put the equipment in a stable position. When selecting the equipment rack, you should choose a rack with the same equipment and a flat surface. When the equipment is stable, the sound will be stable, and the positioning and audio and video contours will also be clear. If it is a floor-standing speaker, also pay attention to the flatness of the ground. Sometimes the equipment rack or the ground is flat, and the feet of the equipment are not flat. It is necessary to use something to stabilize the foot plug. This often happens when the floor speaker or the speaker stand is in contact with the ground.
2. Some people are afraid of vibration, they will put the equipment directly on the ground, and even use the carpet to make a cushion. It is hoped that the vibration absorption effect can be obtained. In fact, the floor is the sound surface of the largest area, and the vibration energy is very large. The low frequency of the sound is below, and the energy of the low frequency is the largest. This method of placement needs to be considered. The best way is to use the mat to hold the equipment up, or buy a speaker stand specifically designed for home theater sound.
3. A good home theater audio rack focuses on stability, and the material should be more steel. Steel is better than iron. If it is wood, it is better to use solid logs. The tube is better than the square tube. If it is a solid tube, it is better. The home theater audio rack should be a shelf of equipment. The height of the shelf is about 40-90. The sound will be lighter and the sound will be dull. This is the height of the person sitting on the listening position.
4. It is best not to place anything on the home theater audio equipment, and keep it clean. After the sound is pressed on the sound, the high frequency will be compressed, the sound will become boring, affecting the effect of sound reproduction.
Summary: The quality of the sound is accumulated bit by bit. Although the replacement equipment can change the effect of home theater audio reproduction, the adjustment of the equipment also takes up considerable weight. When we feel that the sound field is not good, we must use equipment or When the wire is matched, adjust the position or placement of the sound, and the problem may be solved. Therefore, whether it is the configuration of home theater audio equipment, the choice of wire or the placement of the sound position, it has an important influence on the sound field effect of sound reproduction. Do not blindly adjust one of the aspects, comprehensive aspects Cooperate with the debugging of home theater audio, in order to play the real performance of good quality audio, bring natural, real and perfect enjoyment to your audio-visual experience! If you have more to say about the placement of home theater audio, welcome Enter the Home Theater Forum (http://) to share with the majority of home theater enthusiasts.
HDI is the English abbreviation for High Density Interconnector. High-density interconnect (HDI) manufacturing is one of the fastest growing areas in the printed circuit board industry. From the first 32-bit computer from HP in 1985 to the large client server with 36 sequential multi-layer printed boards and stacked micro-vias, HDI/mini via technology is undoubtedly the future PCB architecture. Smaller ASICs and FPGAs with smaller device spacing, I/O pins, and embedded passives have shorter rise times and higher frequencies, all of which require smaller PCB feature sizes, which drives Strong demand for HDI/mini vias.
HDI process
First-order process: 1+N+1
Second-order process: 2+N+2
Third-order process: 3+N+3
Fourth-order process: 4+N+4
Buried Hole Pcb,Blind Hole Pcb,Buried Blind Hole Pcb,Multilayer Blind Buried Hole Pcb
Chuangying Electronics Co.,Ltd , https://www.cwpcb.com