Taiwan LED manufacturers, international energy, wireless communications manufacturer Jinruitong Technology, semiconductor equipment shockproof manufacturers Jiufu Industrial three to cooperate to create LED street lamp market, recently signed the contract.
According to the agreement, çˆç£International Energy will be the LED front-end market development and sales. Jinruitong and Jiufu will be the technical guidance and support behind them. They will provide intelligent LED lighting and environmental protection as the main axis. Energy-saving control system, and TOTAL SOLUTION for all-round LED street lights.
This international energy combined with Jinruitong Technology's ZigBee-based intelligent wireless wide-area street light monitoring and management system, with remote diagnosis and control capabilities, can not only save a lot of labor costs and shorten maintenance time, but also in the lighting rate, bright When the quality of the lamp and the lighting effect are good, energy saving and power saving can be achieved.
çˆç£International Energy Executive said that the LED streetlights provided by çˆç£ çˆ çˆ çˆ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ ç ”å‘ LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED It has high luminous efficiency and long service life. It can save nearly 65% ​​of energy compared with current nano lamps. Together with more than 10% energy saved by intelligent control, it can save nearly 75% of electricity and keep lighting for three years. There is obvious light decay phenomenon, which can meet the illumination and lumen requirements required for the 8 meters height of highways and general flat roads.
Jinruitong Technology also mentioned that the ZigBee wireless monitoring communication system installed in each street lamp in the future can be used not only as energy-saving control and remote control for street lamps, but also for individual or group switches, brightness adjustment control, lamp failure notification system, and also for linking. The community's existing security mechanisms and management form a community security Internet of Things.
A Battery Charger supplies current to the base plate. Once the AGV is in charging position and the collector has made contact with the base plate, the AGV computer turns on the current.
The base plate has chamfered entry/exit ramps to facilitate smooth drive-on/drive-off of the spring loaded collector.
A battery charging contact consists of a base plate, which is installed on the floor or laterally at a bracket adjacent of the AGV runway, and a current collector which is installed on the vehicle.
Battery charging stations may be installed anywhere within the system where the production process allows the AGV to stop (staging areas, turn arounds, loading stops etc.).
Single Phase Charging Contacts
Single Phase Battery Charging Contacts,60A Battery Charging Contacts,100A Battery Charging Contacts,Single Phase Charging Contacts
Xinxiang Taihang Jiaxin Electric Tech Co., Ltd , http://www.chargers.be