1, first set the "download save path"
Click the "Settings" link in the lower left corner.
Click "Download Settings" on the left to enter the corresponding setting interface.
The first line above shows the auto-identified hard disk (u disk) mount directory. For example here is: /mnt/usbhost1
The second line is the location where we saved the downloaded file, and it should be filled in here: /mnt/usbhost1/mybt (The downloaded data will be stored in the mybt directory of the hard disk, and the mybt directory will be automatically created)
Note: If you do not automatically identify the disk hung directory, you will need to manually search for it. View the directory under /mnt through the ftp, ssh, or es file browsers.
After setting it up, click "Apply" to save it.
2, the second step is to enter the transmission of the control page, add the seed to download.
Click the "File" icon in the upper left corner to open the Seed Upload page. You can upload local seeds or add a network address.
After adding the task, select the task, the above row of control buttons, pause, resume, delete, etc. will not say more. Note that there is an exclamation mark icon in the upper right corner, click to enter to set the download part, view statistics, etc.
3. The seeds have been downloaded normally. In order to make better use of transmission, click on the settings icon in the lower left corner
The four icons in the lower left corner are a series of settings, such as speed limit, download directory, and so on. In the evening rush hour, in order to not affect the Internet, you can click on the "tortoise" icon to enter the speed limit mode.
Several considerations in the use of Transmission:
1. Before the box shuts down, be sure to “suspend†all tasks. Otherwise, the next time you start the task, you will re-verify the seeds. It takes time!
2. The transmission configuration file is in the /data/opt/etc/transmission directory of the box. The startup script is in /data/opt/etc/init.d/S50transmission. Friends who are interested can study and modify these two files on their own. . Before you modify, you must first click on the web to stop the transmission service (pay attention to pause the task first), modify and restart the service. Otherwise, the modification cannot be saved and takes effect.
Click the "Settings" link in the lower left corner.
Click "Download Settings" on the left to enter the corresponding setting interface.
The first line above shows the auto-identified hard disk (u disk) mount directory. For example here is: /mnt/usbhost1
The second line is the location where we saved the downloaded file, and it should be filled in here: /mnt/usbhost1/mybt (The downloaded data will be stored in the mybt directory of the hard disk, and the mybt directory will be automatically created)
Note: If you do not automatically identify the disk hung directory, you will need to manually search for it. View the directory under /mnt through the ftp, ssh, or es file browsers.
After setting it up, click "Apply" to save it.
2, the second step is to enter the transmission of the control page, add the seed to download.
Click the "File" icon in the upper left corner to open the Seed Upload page. You can upload local seeds or add a network address.
After adding the task, select the task, the above row of control buttons, pause, resume, delete, etc. will not say more. Note that there is an exclamation mark icon in the upper right corner, click to enter to set the download part, view statistics, etc.
3. The seeds have been downloaded normally. In order to make better use of transmission, click on the settings icon in the lower left corner
The four icons in the lower left corner are a series of settings, such as speed limit, download directory, and so on. In the evening rush hour, in order to not affect the Internet, you can click on the "tortoise" icon to enter the speed limit mode.
Several considerations in the use of Transmission:
1. Before the box shuts down, be sure to “suspend†all tasks. Otherwise, the next time you start the task, you will re-verify the seeds. It takes time!
2. The transmission configuration file is in the /data/opt/etc/transmission directory of the box. The startup script is in /data/opt/etc/init.d/S50transmission. Friends who are interested can study and modify these two files on their own. . Before you modify, you must first click on the web to stop the transmission service (pay attention to pause the task first), modify and restart the service. Otherwise, the modification cannot be saved and takes effect.