Yuanfang Optoelectronics invested 300 million yuan to build a photoelectric detection R&D production base project

Yuanfang Optoelectronics (300306.SZ) recently announced that the company signed an "Investment Agreement" with the Xiaoshan Economic and Technological Development Zone Management Committee, and plans to set up a wholly-owned subsidiary in the local area to invest in the construction of color technology and photoelectric testing equipment research and development production base. The total investment of the project is 300 million yuan and the total construction area is about 60,000 square meters.

According to the announcement, the newly established company is tentatively named Yuanfang Spectrum Technology Co., Ltd. with a registered capital of 60 million yuan. The specific construction content of the proposed project is the development, production and display of color technology and photoelectric testing equipment. It will be carried out in two phases. Construction will start within 6 months after the delisting of the various phases of land, and will be completed within 2 years after the start of construction.

According to the company, this project is a technology research and development and industrialization expansion for the larger application of photoelectric detection and analysis technology after the company successfully realizes industrialization in the field of light source measurement. It will help the company expand its business field and become a new growth point for the company to improve its market competitiveness.

Fog Type Insulator is designed to link together into strings, typically of two or more, Fog Disc Insulator provide much higher voltage protection than any single insulator. The Fog Type Disc Insulators are made of glass to support and insulate the wires. Disc Fog Type Suspension Insulator are comply with ANSI, IEC, BS, AS etc standard.

Advantages of Glass Disc Insulator

1. It has very high dielectric strength compared to porcelain
2. Its resistivity is also very high
3. It has low coefficient of thermal expansion
4. It has higher tensile strength compared to Porcelain Insulator
5. As it is transparent in nature the is not heated up in sunlight as porcelain
6. The impurities and air bubble can be easily detected inside the Glass Insulator body because of its transparency
7. The surface of the glass insulator has high mechanical strength,it profect the surface from cracking.Compared with porcelain insulator,the aging process is much slower
8. Glass is cheaper than porcelain

Glass Insulators U70BP, U100BP, U120BP, U160BP 

1. Breaking load between 40kN and 240kN
2. Frequencies up to 100 Hz are supported
3. Temperature range is between -60°C and +50°C
4. The insulators are made of an insulating element, a cap and a pin
5. The cap and pin are made of high-strength hot galvanized cast-iron, with corrosion- resistant coverage, it can be of the type ball-socket or clevis-tongue. The lock, a split-pin is made of stainless steel or phosphor bronze

Parameters

Currency Designation  U70BP/146H U70BP/146H U70BP/146H U100BP/146H U100BP/146H U100BP/146H U120BP/146H U120BP/146H U120BP/146H
Designation  LXHP4-70 LXHP5-70 LXHP6-70 LXHP3-100 LXHP4-100 LXHP6-100 LXHP3-120 LXHP4-120 LXHP6-100
Diameter D,mm 255 280 320 260 280 320 260 280 320
Spacing H,mm 146 146 146 146 146 146 146 146 146
Creepage L,mm 400 450 550 400 450 550 400 450 550
Socket Soupling,mm 16 16 16 16 16 16 16 16 16
Mechanical Falling Load,KN 70 70 70 100 100 100 120 120 120
Mechanical Routine Test,KN 35 35 35 50 50 50 60 60 60
Wet Power Frequency withstand voltage,KV 45 50 55 45 50 55 45 50 55
Dry Lighting Impulse withstand voltage,KV 110 125 140 110 125 140 110 125 140
Impulse Puncture Voltage,PU 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
Power Frequency Puncture Voltage,KV 130 130 130 130 130 130 130 130 130
Radio Influence Voltage,μv 50 50 50 50 50 50 50 50 50
Corona Visual Test,KV 18/22 18/22 18/22 18/22 18/22 18/22 18/22 18/22 18/22
Power Frequency Electric arc voltage 0.12S/20KA 0.12S/20KA 0.12S/20KA 0.12s/20ka 0.12s/20ka 0.12s/20ka 0.12s/20ka 0.12s/20ka 0.12s/20ka
Net Weight per unit,KG 4.6 5.8 9.2 5.4 5.8 9.2 5.4 5.8 9.2
glass insulatorglass insulatorglass insulator

We warmly welcome friends both domestic and abroad to visit our company, for more details about glass insulator, if you have any questions, please contact with us directly. 

Fog Type Disc Insulator

Fog Type Insulator,Disc Fog Type Suspension Insulator,Fog Disc Insulator,Fog Type Disc Insulators

FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com

Posted on