1. Enter the router setup interface. Take the TPlink router as an example. Enter 192.168.1.1 (some routers are 192.168.0.1, or 192.168.0.6) in the browser and enter the router setup interface.
2. Click "IP and MAC Binding" - "ARP Mapping Table" on the left menu to see many MAC addresses and IP addresses.
Detailed steps: (How to determine the box's MAC address: This is very simple, you can disconnect the phone, the computer's network, the mapping table should be left on the use of a computer and a box of the MAC, the computer IP address you You can click the start of the computer - run - CMD - IPconfig, you can see the IP address, the corresponding computer
MAC address, the rest is the box MAC and IP address)
3. Click "Static ARP Binding Settings" and click "Enable" to add a single entry. Detailed Steps: We paste the MAC and IP address of the box into it (My home box MAC address is 00-11-7F-4C-2E- 3D, the IP address is 192.168.1.125. It should be noted that this IP address can be filled in between 192.168.1.1-192.168.1.254. Save it. In the router "System Tools", click "Reboot Router". .
4. For convenience, you can also bind all networked mobile phones and computers at home to MAC and IP.
After the above steps can ensure that these devices quickly connect wifi, and never dropped.
Plexi Panels,Plexiglass Panels Lowes,Thin Plexiglass Sheets Lowes,Clear Plexiglass Panels
zhejiang goldcity technology co,ltd , https://www.membrane-gc.com