The Future 5G Information and Communication Technology Summit will be held in Beijing on December 2. The conference will focus on the "5G and vertical industry" and discuss the application technology of the industry closely integrated with 5G technology. With the rapid advancement of China's 5G mobile communication technology research and standardization process, the RF device industry is expected to usher in a new round of development opportunities.
Recently, the 5G specification released by the IMT-2020 (5G) promotion group at the second phase of the 5G technology R&D test technical specification is the basis for 5G prototype development, system technical solution verification and 5G industry chain cultivation, and the development of 5G technology. The experiment is of great significance and has become the main measure for building a 5G industrial chain and an innovation chain. At the same time, the Polar code promoted by Huawei was adopted by 3GPP (International Mobile Telecommunications Standardization Organization) as the 5G eMBB (Enhanced Mobile Broadband) control channel standard scheme. This means that the standardization of 5G has entered the acceleration phase.
According to the work of the Ministry of Industry and Information Technology, China's IMT-2020 (5G) promotion group and the 5G commercial plans of the three major operators, China will launch the second phase of the 5G network test in 2017 and the large-scale trial network in 2018. Based on the launch of 5G network in 2019, the official commercial 5G network will be officially established by 2020.
With the approach of the 5G era, smart terminal consumer products represented by mobile phones, tablets and wearable devices will enter a stage of rapid development, and the application of new technologies such as Internet of Things, virtual reality and driverless will accelerate. The speed of the 5G process will greatly enhance the mobile Internet user service experience and meet the massive demand for IoT applications. In the future, it will drive the upgrade of the entire industry chain of communications, electronic components, chips, terminal applications, etc., and the market space is expected to reach the trillion scale.
From the perspective of the industry chain, the 5G accelerated advancement is the first to benefit from the upstream communications infrastructure, including communications equipment, base stations, and RF devices. The three major telecom operators and mobile phone manufacturers will also benefit from the exchange of 5G. The organization believes that the 5G network will use high-frequency network communication above 3Ghz, the data transmission volume is large, the delay is small, the number of frequency bands will increase greatly, and the smart phone frequency band is expected to increase from the current six average frequency bands to 16 in the 5G era. Average frequency band.
With the increase of the frequency band of mobile terminals, the key RF technologies of 5G networks will also be accelerated, including large-scale MIMO technology, millimeter-wave band mobile communication technology and co-frequency full-duplex technology. RF front-end devices will play an important role in the 5G era, and innovative RF device technology is expected to be widely used. Last year, the global mobile terminal RF device market reached 11 billion US dollars. It is expected that the market size is expected to exceed 18 billion US dollars by 2020, and the annual compound growth rate is over 13%.
KNM1L Series Moulded Case Circuit Breaker
KNM1L series Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNM1L series Molded Case Circuit Breaker,KNM1L series Small Size Molded Case Circuit Breaker,KNM1L series Electrical Molded Case Circuit Breaker,KNM1L series Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmoldedcasecircuitbreaker.com