TCL TV L75 (85/110) H9500A-UD (3D) how to install third-party software, watch live video, play video game tutorials via sofa TV elf

TCL TV L75 (85/110) H9500A-UD (3D through sofa sofa elf install sofa butler tutorial, this tutorial applies to TCL TV L75 (85/110) H9500A-UD (3D and other similar models.

Installation process 1 TV and computer with the same router connection → 2 open TCL TV + record IP address information → 3 download sofa TV Wizard → 4 sofa TV Elf dialog box enter TV IP → 5 to complete the installation

Steps
1. After connecting to the network, open the TCL TV to enter the setting interface, find the network settings and record the IP address information

Take the wireless connection (WIFI) as an example, check the IP address: In the network settings, find the SSID signal name on the connection, press OK;

Record the displayed IP address: 172.26.130.188;

See the current IP address

2. Record the IP address: for example 192.168.xxx.xxx;

3. On the computer: Click to download the sofa TV wizard

Note: Windows XP system must first install net.3.5, NET.3.5 download address: Download Now

Unzip the downloaded TV sofa elf on your computer and open the unzipped file "Sofa TV Elf"

When you double-click on the sofa to run the TV wizard, if there is a risk on the computer with anti-virus software, please exit or allow installation.


Win8 system running sofa TV wizard will pop up a confirmation box, click on "still need to run"

determine

4. At this time, enter the IP address of the box in the popup screen

Enter the IP address seen on the box before: IP address: 192.168.xxx.xxx


Wait a moment


5. After successful installation, enter my application - find - sofa manager

Congratulations on your successful installation of a sofa butler!

Tips:
1. If the computer shows that installing the sofa butler has been successful, but the box is not found, then you have to break the box's network in the connection network, then enter the IP on the sofa elf. About 3-4 times will be able to install up (because of different equipment, transmission signal strength is divided)
2. If the installation fails, check whether the network used by the box and the computer is the same network. If not, change to the same network before proceeding.

If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the following sofa butler official QQ group.

TCL TV L75 (85/110) H9500A-UD (3D other installation methods: http://

Download the TV application and recommend the best application market sofa butler on Smart TV. Watch videos on smart TVs and recommend using pudding videos. Fun smart TV (and box), exciting content in the sofa forum.

The PLC splitter is used to separate or combine optical signals. A PLC is a micro-optical component based on planar lightwave circuit technology and provides a low-cost light distribution solution with the small form factor and high reliability. 


Rackmount Splitter is manufactured using silica glass waveguide circuits that are aligned with a v-groove fiber array chip that uses ribbon fiber. Once everything is aligned and bonded, it is then packaged inside a miniature housing. PLC splitter has high-quality performance, such as low insertion loss, low PDL, high return loss, etc.


Advantages
Suitable for multiple operating wavelengths (1260nm – 1650nm); unstinted.
Equal splitter ratios for all branches.
Compact configuration; smaller size; small occupation space.
Good stability across all ratios.

High quality; low failure rate.

19 inch  1U rack mount 1x16 PLC1U rack mounted sc apc 1x64 plc splitter


Rack Mounted PLC Splitter

Rackmount Splitter,Fiber Optical Splitter Rackmount,1U Rack Mount PLC Splitter,PLC Fiber Optical Splitter

Sijee Optical Communication Technology Co.,Ltd , https://www.sijee-optical.com

Posted on