Highlights:
This article refers to the address: http://
· Industry's most comprehensive USB Type-C IP solution, including USB-C 3.1/DisplayPort 1.3 PHY, USB-C 3.1/DisplayPort 1.3 controller with HDCP 2.2 content protection technology and verification IP
· HDCP 2.2 security protocol integrated into the DesignWare USB-C 3.1/DisplayPort 1.3 controller for protection when audio and video content is transmitted via the USB Type-C connector
· For Ultra HD TV and display applications, DisplayPort 1.3 in USB Type-C Alt Mode supports 8.1 Gbps per channel and up to 8K resolution
· Supports the latest USB Type-C port controller specifications, providing flexible hardware and software partitioning to differentiate USB Type-C features while maintaining USB Type-C compatibility
· As part of the IP Accelerated program, the DesignWare USB-C 3.1/DisplayPort 1.3 IP subsystem, IP prototyping suite and IP software development kit reduce the time and effort required to integrate IP into the SoC
21ics Synopsys has announced the launch of its new DesignWare USB-C 3.1/DisplayPort 1.3 intellectual property (IP) solution that integrates USB Type-C (USB-C) and SuperSpeed ​​USB 10 Gbps (USB 3.1 Gen) 2) Interface with DisplayPort 1.3 and DisplayPort 1.3 interface with High-bandwidth Digital Content Protection (HDCP) 2.2 IP. The solution accelerates the development of mobile and digital office system-on-a-chip (SoC), which requires 10 Gbps of data transfer speed and the ability to transfer secure audio and video content and charge through the same USB Type-C connector. Synopsys is the first to offer a USB Type-C IP solution that includes the HDCP 2.2 protocol. The implementation of DisplayPort Switch Mode (Alternate Mode) increasingly requires the HDCP 2.2 protocol to protect advanced data during transmission. Support for new USB Type-C port controller specifications provides flexible hardware and software partitioning options so designers can manage system cost and features. The DesignWare USB-C 3.1/DisplayPort 1.3 IP subsystem, IP prototyping kit, IP software development kit, and verification IP enable designers to quickly integrate and validate the latest high-performance USB Type-C interfaces in their SoCs.
The DesignWare USB-C 3.1/DisplayPort 1.3 IP solution delivers data rates up to 10 Gbps and supports the latest USB data lines and connectors developed by USB Type-C and USB-IF for forward and reverse reversible plug orientation and connectivity. Line orientation, two-way charging, and switching modes to improve the user experience. The DisplayPort switching mode uses USB Type-C connectors and existing SuperSpeed ​​USB lines on the data line to transmit data at a maximum channel bandwidth of up to 32.4 Gbps, ie each of the four lines operates at 8.1 Gbps. With 50% more bandwidth than DisplayPort 1.2, it can support Ultra High Definition (UHD) TVs and monitors with resolutions up to 8K. By eliminating the need for external conversion components for USB and DisplayPort data paths,
The DesignWare USB-C 3.1/DisplayPort 1.3 IP solution is the industry's first to integrate HDCP 2.2 content security technology as the latest advancement in content protection technology. HDCP 2.2 content security technology requires playback of Ultra HD 4K and higher resolution content via DisplayPort switching mode. It creates a secure connection between data sources and displays using industry-standard public keys and advanced encryption algorithms for successful content delivery. Synopsys' HDCP 2.2 Content Protection IP provides designers with a complete and highly secure implementation of the HDCP 2.2 standard, including the entire control processing and key exchange protocol with authentication, and key stream generation. Integrating HDCP 2.2 content protection technology into the DesignWare USB-C 3.1/DisplayPort 1.3 IP solution helps designers meet the stringent compliance requirements of DCP LLC authorities.
The DesignWare USB-C 3.1/DisplayPort 1.3 IP solution is based on Synopsys' proven, silicon-proven SuperSpeed ​​USB 10 Gbps (USB 3.1 Gen 2) solution, which has been successfully integrated into a wide range of customer SoCs. The solution meets USB-IF standard specifications, including 10 Gbps performance and 5 V and 3.3 V tolerances, and is backward compatible with USB 3.0 and 2.0.
The DesignWare USB-C 3.1/DisplayPort 1.3 TX PHY displays an open "eye" in the signal eye diagram when operating at the maximum data rate of each specification
"For more than 18 years, Synopsys has been an active member of USB-IF, and their USB IP solution has been used to simplify the integration and adoption of the latest USB interfaces," said Jeff Ravencraft, chairman and chief operating officer of USB-IF. "Synopsys' new products that support the latest USB-IF specifications will help designers who are using USB-C to quickly integrate this technology into their SoCs."
“As USB Type-C switching modes are increasingly adopted, designers now need to be able to transfer secure audio, video, and charging via the same USB Type-C connector,†Synopsys IP and Prototyping Vice President John Koeter said. "By providing a complete, integrated DesignWare USB-C 3.1/DisplayPort 1.3 IP solution with HDCP 2.2 content protection IP, Synopsys enables designers to accelerate the integration of high-performance USB Type-C technology into their SoCs The process in the middle, while achieving secure transmission of high-definition video content."
Supplies and resources
The DesignWare USB-C 3.1/DisplayPort 1.3 PHY with FinFET process technology and HDCP 2.2 content protection IP is now available. The DesignWare USB-C 3.1/DisplayPort 1.3 controller and IP subsystem are scheduled to be available in the third quarter of 2016. Please contact Synopsys for availability information on the relevant DesignWare IP Prototyping Kit and IP VirtualizerTM Development Kit.
This inflator has an automatic shutoff,inflate for diferent PVC product, for example,inflate for basketball football,rugbyball,car tire, bike tyre and so on. adapters for different stems, a storage bag, and an LED light with four settings. This Tire Pump is compact, quiet, and easy to use with an USB power cord.It can be a power bank charger for mobile phone.
Portable Air Compressor For Car Tires,Ring Tyre Inflator,Car Tyre Air Pump,Portable Tyre Inflator
SHENZHEN SMARTNEWO TECHNOLOGY CO,. LTD , https://www.newopump.com