Among the power drive modules, 4W and 8W are mainly used for small lamps such as downlights, ceiling lamps, kitchen lights, etc., together with LED light sources, to create an intelligent and economical integrated control system, such as walking ladders, restrooms, and public corridors. The 12W and 16W are mainly used for medium-sized lamps such as strip lamps, three-proof lamps and grille lamps. They are mainly used in underground garages, office corridors, halls, elevator halls and other occasions.
The light source module is designed according to the requirements of the luminaire to replace the light source in the traditional luminaire. Divided into a single high-power type, low-power combination type. The advantage of a single high-power type is that the power wattage is integrated into a small area, thereby reducing the cost and saving space; the disadvantage is that an increase in heat dissipation and light distribution means is required. The advantage of the small power combination is that the number of single watts is small, and it can be flexibly matched according to needs, without considering heat dissipation, and the light distribution is simple; the disadvantage is that the installation is complicated.
The control module is used to provide a control signal to the power drive module to achieve high and low brightness switching to maximize energy saving. It is divided into voice control module, infrared module and so on.
The networking module is mainly used for the networking control of LED lamps such as office buildings and underground parking lots, and realizes a control mode of multiple control and multiple control, achieving rapid response and creating a light environment.
During the concrete construction, the lighting fixture factory or the lighting installation and design unit, according to the customer's site environment, the above modules are selected and combined, and then the corresponding lamp housing is matched according to the use environment. After flexible configuration, a combination of intelligent lighting systems is realized.
The usb car charger can plug into your car's cigarette lighter jack to become a powered USB port to fit all electronic appliances with a USB charging Cable . It is very convenient to use in the car when you go outside for travel or business.
Yidashun offers dual usb car charger 5V 2.4A and 5V 3.1A, it is aluminum case with good-looking, and it can be as a hammer to break the window of the car when in emergency.
Yidashun also offers plastic usb mobile car charger 5V 4.8A, and same one with extension usb-c or Lighting Cable, it is high AMP with fast-charging of your device. And one more USB Car Charger makes you convenient; it is with 6-port and 5-port usb to charge 6 and 5 usb devices at the same time.
USB Car Charger
USB Car Charger,Car Charger,Car Phone Charger,Car Charger Adapter
Shenzhen Yidashun Technology Co., Ltd. , https://www.ydsadapter.com