2. For the current crystal lamps, most of them are G4 or G9. The difference between the two is very obvious. The most fundamental difference is that G4 can only do low voltage, because the distance of the pins is too close, so if your lamp is G4 Then, there must be a transformer in the ceiling of the lamp! And now the G9 only has to do high voltage, that is, if your lamp is G9, there will be no transformer on the lamp! This is a very good difference.
3. From the appearance of the G4, the two pins are very similar to the pins of the embroidery needle. Of course, the volume of the bulb is also small, and the two pins of the G9 are like oval ring pins, not like needles. Pins. Of course, the volume is also slightly larger.
4. For a luminaire produced by a regular manufacturer, according to the national standard, no matter which country's standard, it is necessary to affix a watt label, (or called a lamp head), the requirement is to stick to the customer when loading the bulb or replacing the bulb. The place that must be easily seen when it is usually attached to the lamp head. Of course, some manufacturers may not stick to each of the heads of the crystals, but at least they have to stick one. If you don't post one, then you buy the same as the three products. If there is a label, how many volts do you read above? G4 can only do low voltage, and generally do 12V, and for G9, because it is only high voltage, it should be written around 220V.
5. Also, if you buy a lamp with a light bulb at the time, then in addition to the distinction I said above, there should be a parameter mark on the light bulb, such as writing 12V 20W or writing 220V. 40W, etc., the word on a light bulb can't be seen clearly. You can look at the words of other light bulbs. If all of them are not printed, the quality of the light you buy is too unguaranteed. In fact, there are also JC bulbs for the G4 bulbs (referring to the capsule halogen bulbs).
6. Again, remind you to buy a replacement bulb, be careful that in addition to the model to be the same as the rated, the power of the bulb can not be greater than the rated power, such as the G4 bulb is equipped with a transformer, if the replacement bulb If it is larger than the rated one, the transformer can not withstand it, and it is easy to cause the transformer to burn.
We are a pioneer firm with the main focus on offering a top class range of LED Street Light to our deemed patrons. Offered street lights are fabricated under the surveillance of professionals as per market trends. In addition to this, our quality editors take charge of delivering a flawless range at the patrons end to maintain pace with the patrons needs and requirements. Moreover, patrons can avail these products in various sizes and grades.We have LED Street Lights in the range of 30w to 200w. All are smd based with very high quality lens.We use high surge protection drivers and our product is ip67.
60W Led Street Lights,60W Led Street Light Solar,60W Led Street Lamp,60W Aluminium Led Street Light
Yangzhou Bright Solar Solutions Co., Ltd. , https://www.cnbrightsolar.com